Hangar Door Hardware > Top Guides

Single Wheel Top Guide

Our Single Wheel Top Guide is a substantial top guide. Designed to handle lare wind loading on openings with little deflection. Standard sizes range from 5" diameter to 10" diameter wheels. Special sizes are available upon request. Wheels are solid steel with Oilite bronze bushings for permanent lubrication.

Double Wheel Top Guide

As with our Single Wheel Top Guide our Double Wheel Top Guide is designed to handle large wind loads. For wide panels (10" or wider). Standard with 6" diameter wheels. Wheel and hole spacing as required. Wheels are equipped with Oilite bronze bushings for permanent lubrication.

Single Angle Top Guide

For straight sliding doors not over 6" thick. Multiple parallel doors are readily guided with minimum superstructure metal. One guide angle per door run. Ideal for use with our 9" or 12" Bottom Rollers. Wheels are equipped with Oilite bronze bushings for permanent lubrication. Also available with rubber bumper stops. Made right or left hand.

I-Beam Top Guide

Our I-Beam Top Guide is designed to allow for slight roof deflection. For doors using at least an 8" channel. Wheel spacing and leg height as required for beam size and deflection. Wheels are equipped with Oilite bronze bushings for permanent lubrication. Load rating based on leg height.

Telescoping Top Guide

For large doors where greater roof deflection is required. Supplied with 4 each horizontal and 4 each vertical rollers. Wheels are equipped with bronze Oilite bushing for permanent lubrication. Units are sized per application. Design assistance available upon request.