Incorporating a 316 grade, decorative brushed stainless steel body plate and bearings, the hanger is based on proven technology allowing for easy height adjustment. The assembly is complete with the addition of front and back plates, two gaskets, and a fixing nut.
The specially designed track fixing assembly incorporates a track fixing nut, bracket, gaskets and screws for 3/8” and ½” glass. Brackets must be fitted at 16” centers. Six brackets are supplied with the 6’-10” kit and seven with the 7’-10” kit.
Manufactured from 316 grade, decorative brushed stainless steel, the track is supplied in 6-10” and 7’-10” lengths for recommended door widths 42” and 50”. Track is slotted at 16” centers to take the bracket assemblies. Ends are finished with specially designed mouldings and track end stops.
Coburn Glassmaster 100™ has been loaded to 220 lbs. and tested to 100,000 cycles without failure. It is based on the highly successful Straightaway 100 which is widely accepted as being the best system of its type on the market.
Designed for use with 3/8” and ½” toughened glass. Gaskets to suit both thicknesses are supplied as standard with each kit. The product should only be used with toughened glass and care should be taken when fitting to ensure that drilling dimensions are accurate.
| TRACK METHOD: | Top hung |
| APPLICATION: | Glass partitioning and glass residential doors |
| MAX. DOOR WEIGHT: | 100kg (220lb) |
| MAX. DOOR HEIGHT: | 2.5m (8') |
| DOOR THICKNESS: | 10mm or 12mm toughened glass |
| TRACK LENGTHS: | 2.1m 2.5m |
| TRACK TYPE: | Stainless steel, fine linished finish |
| HANGERS: | Stainless steel body and bearings, nylon wheels. Fine linished body plate fittings |
Glassmaster Classic is the latest in contemporary sliding door hardware for interior glass partition systems. Glassmaster Classic is supplied in a complete kit to include all components with simple to follow, comprehensive instructions.
Suitable for interior doors of glass construction up to 48” width.